S
MSI Logo  Home  609-265-2110 Email Search

new stuff
pressure

efi

egt
cables
pulling
usm

 

Gift Certificates

 

 

 

Racepak Accessories

Download Accessories GPS - Gmeter  Shift Light - 0-5 modules

V-net modules only

V-net Module mounts Laptop Cables

Pre-loaded Dell Laptop

 

 

 

  • No password - fast startup
  • No advertising or virus popups
  • Windows 11 Home Edition
  • Racepak DataLink II software
  • MSD View software
  • 8GB RAM
  • 128GB SSHD
  • 3 USB 3.0 ports
  • 1 HDMI port

 

 

890-CP-DELL1

 Dell Laptop

$795

 

Stream up 24 data items to your Ipone/Ipad/Android

App is free from App Store

Will not download logs.

https://www.youtube.com/embed/O70jcI3bVNc

Tips:

  1. Blue light flashes about 5 times  fast when the V-net network is powered up.
  2. Light is out when phone not connected.
  3. Light is solid on when connected.
  4. Factory password is 123456
  5. Bluetooth link name in phone settings is RP_xxxxxx (your serial number)

 

 

230-VM-DASHAPP

 Dshapp

$326

Stand alone GPS Module

Add GPS speed to any non-gps equipped Racepak V-Net Dash or recorder. Provides a speed data channel for analytical, display and odometer information.

Can supply KPH or MPH. Includes GPS antenna.

A great addition to the IQ3 or UDX dash kits.

Note that if adding to a UDX Street Rod or Replay programing kit 250-UG-UDXPG is required.

 

220-VM-GPS

 GPS V-Net module

$520

Stand alone 2 axis G-meter

2 axis G-meter for any v-net system. Very popular with IQ3 Drag dash.

 

  

220-VP-GM2AXIS

 GMeter V-Net module

$520

V-net Module mounts

Keep you V-net modules neat and secure,

 

click to expand

M-121

 Black Aluminum Panel V-net mount

$65

With paded clamp for round tube. Works for dragsters and dash bars etc for door .

 

Specify size 1 1/4" 1 1/2" r 1 5/8" in the note

 

 

click to expand

M-122

 Black Aluminum V-net mount - tube mount - specify size

$68

Tube Mount

 

Tube mounts are available from ARC

 

 

click to expand

V-net module only

Replacement v-net module only (you have the actual sensor)

 

specify if temperature or pressure and what pressure range in the notes.

  

v-net mod only

$202

Voltage modules

This module will give 5 volt power to your sensor and send back 0-5 results into the Racepak system.

Has Molex flat 3 pin connector and comes with the mating connector/terminals.

  

230-VM-AN-5V

 0-5 volt module

$212

This module will give 12 volt power to your sensor and send back 0-5 results into the Racepak system.

Has Molex flat 3 pin connector and comes with the mating connector/terminals.

  

230-VM-AN-12V

 0-5 volt module

$212

 

Miscelaneous Modules

Part Number

  
Shift Light - module only - requires your acutal light or available below 230-VM-SHIFTLTE
  $326  
   

Event marker. Ground or 12/16 volt

230-VM-EVENT

 
  $206  
   
  $200  
   
  $200  
   
   $200  
   
   $200  

Laptop-Serial Cables

Serial cable for V300SD, Sportsman, IQ3

Most laptops also require a USB converter to go with this cable. Links with cable below.

This is NOT 2.5mm Stereo

 

280-CA-ST140SR

 9 Pin Serial Cable

$36
 
Converts the 9 pin serial to USB. New version for Windows 8 and above. Links with above cable.

 

890-CA-USB2SER

 USB Converter

$77

UDX serial cable #1 - Plugs into the back of a UDX logger or UDX Replay or UDX Street Rod. Only available combined with 280-CA-ST140SR and USB converter above.

 

Frequently this cable is permanantly installed with the female stereo end flush mounted in the dash for easy access. Sometimes tie-wrapped below the dash.

 

280-CA-SR-UDX

 UDX serial combo

$91

 

V300 non SD serial cable 9/25 pin. Requires USB converter above. This is not a standard computer cable - it has a special pin-out.

 

 

 

280-CA-SR-V300

 UDX serial combo

$128

 

 

 

Crimpers

Crimper for DS, temp and pressure repair kits

 

800-XP-CRIMP01F

 crimper

$92

 

Download Accessories

USB reader for the SD card

 

890-SD-RDR-5

 USB SD Card Reader

$48
 

SD card with holder for Sportsman & V300SD

Note that you can use a standard SD card, but you will likely end up bending the receiving pins in the Racepak unit because you end up using needle nose pliers to get the card in/out.

The number of runs on the SD card need to be kept below 100. While the physical storage would allow thousands of runs, above 100 the software has some dificulty functioning.

How to clean-off your SD card

890-SDWC-XGB

 SD Card

$48

 

micro SD card & adapter for IQ3 Drag and IQ3 Puller/road race logger

 

The number of runs on the SD card need to be kept below 100. While the physical storage would allow thousands of runs, above 100 the software has some dificulty functioning.

 

890-SD-M4GB

 SD Card

$24
 

 

V300 Cartridge to SD card down load kit. Saves a lot of time and frustration download runs out of a V300.

Includes Cartridge reader, SD card, SD Stick Reader, cable & insturctions.

 

890-KT-CARTSD

 V300 download to SD

$580
 

Cordless Drill battery socket. Neil & Parks sells a socket to alow powering the Racepak from a M18 battery.

http://www.neilparks.com/chassis/powersupplies.htm

 

 

lllll